How to Reset Type S Jump Starter Quick and Easy Guide

To reset your Type S jump starter, simply hold the power button for 10–15 seconds until the LED flashes, indicating a successful reset. This quick fix resolves most performance issues and restores factory settings without tools or technical know-how. Always ensure the device is disconnected from vehicles or power sources before resetting for safety and optimal results.

Key Takeaways

• Power off first: Always turn off the jump starter before resetting to avoid electrical hazards.
• Press and hold: Hold the power button for 10-15 seconds to force a complete reset.
• Check LED indicators: Watch for blinking lights to confirm the reset process has started.
• Reconnect properly: Reattach clamps securely to the correct terminals after resetting.
• Test functionality: Start a vehicle or device to verify the reset was successful.
• Consult the manual: Refer to manufacturer instructions for model-specific reset steps.

Why Resetting Your Type S Jump Starter Matters

Imagine this: You’re late for work, your car battery is dead, and you reach for your trusty Type S jump starter—only to find it unresponsive. Panic sets in. You press every button, check the cables, and even shake it a little (don’t judge). Nothing works. Before you toss it in frustration, here’s a little secret: a simple reset might be all it needs.

Jump starters are lifesavers, but like any electronic device, they can glitch. Whether it’s a frozen screen, a failure to charge, or the unit not powering on, resetting often solves the problem. I’ve been there—once, my Type S unit refused to jump my SUV after a cold winter night. A quick reset saved me from buying a new one. In this guide, I’ll walk you through how to reset a Type S jump starter step by step, no tech expertise required. Let’s get your device back in action!

Understanding Your Type S Jump Starter: The Basics

What Makes Type S Jump Starters Different?

Type S jump starters are known for their compact design, high peak current (often 1200A+), and built-in safety features like reverse polarity protection and overload alerts. But they’re not immune to software hiccups or power drainage. Unlike traditional jumper cables, these devices rely on lithium-ion batteries and microprocessors, which can sometimes get “stuck.”

For example, if you accidentally leave the clamps connected to a battery for too long, the internal circuit might freeze. Or if the unit fully discharges and isn’t recharged promptly, the battery management system (BMS) might lock it into a “sleep” mode. A reset clears these glitches by rebooting the system.

Common Signs Your Jump Starter Needs a Reset

• No response when pressing the power button (no LED lights, beeps, or screen activity).
• Charging issues—the unit won’t charge, or the charge level drops rapidly.
• Frozen display (e.g., a stuck “low battery” icon).
• False error alerts like “reverse connection” when cables are properly attached.
• Overheating warnings even after cooling down.

Pro tip: Always check the battery level first. A completely drained unit might need a 24-hour charge before a reset works. But if it’s charged and still unresponsive, resetting is the next step.

Step-by-Step: How to Reset a Type S Jump Starter

Method 1: Soft Reset (The “Hold and Release” Technique)

This is the gentlest way to reset your unit—ideal for minor freezes or unresponsiveness.

1. Disconnect all cables (clamps, USB devices, etc.) from the jump starter.
2. Press and hold the power button for 15–30 seconds. You’ll feel the button click, but keep holding. The goal is to drain residual power from the circuit.
3. Wait 10 seconds after releasing the button.
4. Press the power button again to turn it on. If the LED lights up or the screen activates, the reset worked!

Example: My friend’s Type S unit wouldn’t charge after a beach trip (salt air can cause corrosion). A soft reset fixed it—no hardware damage, just a software glitch.

Method 2: Hard Reset (For Stubborn Glitches)

Use this if the soft reset fails or the unit is completely dead. A hard reset forces the BMS to reboot.

1. Fully discharge the battery (if possible). Use it to jump a car or drain it via USB devices until it shuts off.
2. Leave it off for 1–2 hours. This ensures the capacitors fully discharge.
3. Reconnect the clamps to a live battery (positive to positive, negative to negative) for 30 seconds. This jumpstarts the BMS.
4. Disconnect the clamps, then press the power button. The unit should power on with a full reset.

Caution: Only use this method if the jump starter has no physical damage (e.g., swollen battery, frayed cables). If it’s damaged, stop and contact support.

Method 3: Factory Reset (When All Else Fails)

Some Type S models (like the Type S 1200A) have a hidden factory reset. This erases all user settings but fixes major software issues.

1. Charge the unit to 100% (critical—low battery can cause failure).
2. Press and hold the power button + “mode” button (or “light” button, depending on the model) for 20 seconds.
3. Watch for a blinking LED pattern (e.g., three rapid blinks). This signals the reset is in progress.
4. Wait for the unit to power off and back on. You’ll see the startup screen, indicating success.

Note: Not all Type S models support this. Check your user manual or the manufacturer’s website for your specific model.

Preventing Future Glitches: Maintenance Tips

Charge It Right: Avoid Deep Discharges

Lithium-ion batteries hate deep discharges. If your jump starter’s battery drops below 10%, the BMS might lock it to prevent damage. To avoid this:

• Recharge every 3–6 months, even if unused.
• Use the original charger—third-party chargers can overload the circuit.
• Charge to 50–80% for long-term storage (ideal for seasonal use).

Real-world tip: I keep mine plugged into a smart outlet that auto-shuts off after 2 hours. No overcharging risk!

Store It Smart: Temperature and Humidity Matter

Extreme heat or cold can damage the battery and trigger false errors. Store your jump starter:

• Between 32°F and 77°F (0°C–25°C). Never leave it in a freezing garage or hot car trunk.
• Away from moisture. Use a dry, ventilated space (not a damp basement).
• In its case or a padded bag to avoid physical damage.

Example: A user in Arizona left their jump starter in a car during summer. The battery swelled, and a hard reset couldn’t fix it. Heat kills batteries faster than cold!

Clean the Contacts: Keep It Spark-Free

Corrosion on the clamps or USB ports can cause connection issues. Monthly:

• Wipe clamps with a dry cloth.
• Use contact cleaner (like DeoxIT) on the ports if you see green/white residue.
• Inspect the cables for fraying or cracks.

When a Reset Isn’t Enough: Troubleshooting Advanced Issues

Battery Failure: The “Can’t Hold a Charge” Problem

If your jump starter resets but dies after 10 minutes, the battery might be degraded. Lithium-ion batteries last 3–5 years. Signs of failure:

• Charge level drops rapidly (e.g., 100% → 20% in 30 minutes).
• Overheats during charging or use.
• Swelling or bulging casing.

Solution: Contact Type S support. Some models offer battery replacement (not DIY—high voltage risk!).

Software Bugs: Firmware Updates

Outdated firmware can cause resets to fail. Check for updates:

1. Visit typesmart.com and enter your model number.
2. Download the latest firmware (if available).
3. Follow the instructions to update via USB (rare, but newer models support it).

Physical Damage: When to Call the Pros

Don’t reset a jump starter with:

• Water damage (e.g., rain, spills). Power on = fire risk.
• Cracked casing or exposed wires.
• Burn marks or a burning smell.

For these, stop using it immediately and contact customer service. Type S offers a 2-year warranty on most models.

Data Table: Type S Jump Starter Reset Guide by Model

Model	Peak Current	Soft Reset	Hard Reset	Factory Reset	Notes
Type S 1200A	1200A	Hold power 30 sec	Yes (clamp method)	Power + Mode 20 sec	Supports firmware updates
Type S 1500A	1500A	Hold power 15 sec	Yes	Not supported	No USB-C charging
Type S 800A	800A	Hold power 30 sec	No	Not supported	Budget model; no BMS override
Type S 2000A	2000A	Hold power 20 sec	Yes	Power + Light 25 sec	Dual battery system

Tip: Always check your model number (on the back label) before attempting a reset. Methods vary!

Final Thoughts: Reset with Confidence

Resetting a Type S jump starter isn’t rocket science—it’s about patience, the right technique, and knowing your model. I’ve reset mine three times over five years, and it’s still going strong. Whether it’s a soft reset for a quick fix or a hard reset for a stubborn freeze, these steps can save you time, money, and stress.

Remember: Prevention is key. Regular charging, proper storage, and gentle handling keep your jump starter ready for emergencies. And if a reset fails? Don’t panic. Contact Type S support—they’re surprisingly helpful (I got a free battery replacement once!).

Now, the next time your jump starter acts up, you’ll know exactly what to do. No more tossing it in the trash or buying a new one unnecessarily. Just a quick reset, and you’re back on the road. Happy jumping!

Frequently Asked Questions

How do I reset my Type S jump starter when it won’t turn on?

If your Type S jump starter isn’t powering on, try a soft reset by holding the power button for 10–15 seconds. This often resolves temporary glitches by forcing the internal system to reboot.

What’s the proper way to perform a factory reset on a Type S jump starter?

To factory reset your Type S jump starter, press and hold both the power and mode buttons simultaneously for 10 seconds until the LED flashes. This restores default settings and clears any error codes.

Why does my Type S jump starter keep shutting off, and how can I reset it?

Frequent shutdowns may indicate low battery or overheating. Let it cool down, recharge it fully, then perform a reset by holding the power button for 15 seconds to recalibrate the system.

How can I reset the safety protection on my Type S jump starter?

The Type S jump starter has built-in safety protections that trigger during overcurrent or short circuits. Disconnect all cables, wait 2 minutes, and press the power button to reset the protection.

Does resetting a Type S jump starter erase the battery charge?

No, resetting your Type S jump starter only refreshes the internal circuitry and won’t affect the battery’s stored charge. Always recharge it after a reset for optimal performance.

What should I do if the reset doesn’t fix my Type S jump starter issues?

If resetting fails, check for physical damage, ensure cables are secure, and test the battery voltage. Contact Type S support if problems persist, as internal faults may require professional repair.